Posted in: Cars,
by Gregg Laskoski on May 1, 2013 02:30 PM
Nissan is recalling 19,258 2013 Nissan Pathfinders and Infiniti JX35s to fix a brake problem, according to the National Highway Traffic Safety Administration (NHTSA).
"The front brake torque member was improperly cast, resulting in structural weakness," said NHTSA in its summary of the problem. "This can lead to premature failure and cracking. If the brake torque member fails, the brake caliper may move and contact the inside of the road wheel, resulting in reduced braking and increasing the risk of a crash."
The affected vehicles were built from December 3, 2012 through January 29, 2013 at Nissan's Smyrna, Tennessee plant.
Nissan told federal safety regulators it received a field report on March 1 involving a front brake torque member failure on a 2013 Pathfinder. Following that report, Nissan placed a yard hold on all potentially affected vehicles at the plant while a supplier investigation was conducted, according to Edmunds.com.
"Detailed analysis of the failed front brake torque member revealed that the casting was out of specification due to a 'cold shut' condition which occurred during the supplier's manufacturing process," Nissan said in documentation filed with NHTSA. "A small amount of molten iron flowed into an adjacent mold prematurely, and did not fuse properly with the newly introduced metal due to temperature loss."
Nissan said its supplier, Hitachi Automotive Systems Americas Inc., of Harrodsburg, Kentucky, has implemented several production "countermeasures," including adding reservoirs to the casting cavity to prevent overflow, "in order to prevent this issue from reoccurring."
Nissan dealers will replace the defective torque members. The recall is expected to begin in early May. Owners can contact Nissan at (800)647-7261.